busyiorew.blogg.se - Ncs expert connect to car

#Ncs expert connect to car code
#Ncs expert connect to car series

That’s all about BMW E series odometer change, from miles to km, using NCS Expert coding software. Open “FSW_PSW.MAN” and delete its contents. When you see “Coding ended” below the module name, the process has completed.ĭepending on what you coded, you may need to turn your car off and back on again to verify the desired feature/behavior has taken effect.ĥ. Click “Execute job” to have NCS Expert write the information from FSW_PSW.MAN to your vehicle. Verify that the correct job appears in the “JOBNAME“ field.Ĥ. Do this by selecting “Job” and then “SG_CODIEREN”, then click OK.

#Ncs expert connect to car code

Otherwise, NCS Expert is ready to code your module as soon as the job is changed back to the default, “SG_CODIEREN”. If you closed NCS Expert, follow steps 1-6 in the section above to get back to the correct screen. Change the field value(s) to your desired settings(this is where you look for the WEG_EINHEIT field name, and change value to “km”), then save this file as “FSW_PSW.MAN”, overwriting the empty one you created earlier.ģ. Open “FSW_PSW.TRC”(you can use NOTEPAD) and find the field you wish to modify. Part 2 – NCS Expert write odometer from miles to km This file contains some general information about your car, as well as all the values currently stored in the module you read from. “FSW_PSW.TRC” (called a “trace file”) in the “C:\NCSEXPER\WORK” folder.

Once NCS Expert has read data from a module, it stores that data in a file called.

When you see “Coding ended” below the module name, the process has completed. Select “Execute job” to begin reading from your selected module.

At this point NCS Expert is relatively harmless, as all it can do is read from your car.

Always read job names carefully to ensure you select the correct one. This will change the job from one that writes to one that only reads data.

Select “Job” and choose “CODIERDATEN_LESSEN” from the menu.

Click OK again on the window that appears to return to the main NCS Expert window. Select the module you want to read values from(in this case KOMBI OR AKMB) and click OK. You should see the CHASSIS, FG, and FA fields populated in the top part of the NCS Expert window.ħ. Click OK again to have NCS Expert read your VIN. Then select which module you want NCS Expert to read your VIN from. There are 2 connections to the vehicle CAN Bus wiring (CAN HI & CAN LO) along with a connection to a permanent, fused 12v power supply and an earth connection. Select your chassis from the list and click OK. The interface features a mini wiring connector, which unplugs to allow easy installation.

This will tell NCS Expert to attempt to read your VIN from your vehicle’s ECU so you don’t have to type it in.Ħ. Go to File -> Load profil and select “Revtor’s NCS Expert Profile”, click OK.ĥ. Open “C:\NCSEXPER\WORK” and create an empty text file named “FSW_PSW.MAN”. You should also have a program called “EDIABAS Server” running in your task bar. Launch INPA and verify that it reads Battery: ON and Ignition: ON. Your vehicle’s ignition should be in the ON position, but your engine does not need to be running.Ģ. Connect your cable (BMW INPA K+DCAN cable or BMW ICOM A2 emulator) to your vehicle’s OBD II port and to your computer. Here’s a user solution to change odometer from miles to km on BMW E-series by using NCS Expert step-by-step.ġ.